Congratulations on your new water heater! A properly installed water heater can serve you for years without any issues. However, for the best service, it should be maintained regularly; you can get in touch with a plumber in De Leon, TX, for the best assistance. Also, here are some maintenance tips that will keep your new water heater in excellent working condition:
1. Set the Temperature
Be sure to set the thermostat to the recommended temperature of about 120°F (49°C) right after installation. This temperature prevents scalding, reduces energy use, and minimizes wear and tear on the heating element.
2. Inspect for Leaks
Look for any sign of dripping or leakage at the seams, valves, or pipes around the water heater such that they do not leak around the connections. Though the effect of small drips may seem harmless, they can really do considerable damage once left unattended.
3. Drain Once a Year
Sediment that accumulates in the tank can affect efficiency and contribute to corrosion. You should empty and wash the tank at least once in a year. This can be done by draining a few gallons of water using a drain valve, which will take out some of the debris left in the tank.
4. Test Relief Valve
The pressure relief valve is a very important safety feature as it prevents the build-up of excessive pressure. Lift the lever and let it snap back down. Water should run out momentarily through the discharge pipe. If not, the valve will require replacement. All you have to do is contact a water heater replacement in De Leon, TX.
5. Inspect the Anode Rod
The anode rod is what keeps the tank free from corrosion. This should be checked every 1-2 years and replaced if it’s corroded or is less than ½ inch in diameter. This small expense, however, can do an awful lot for increasing the lifetime of your water heater.
6. Insulation to Tank and Pipes
Insulating the water heater tank and pipes would probably cut down the 80% heat loss that enables effective energy gain from its currents. For additional safety, use insulation materials that were manufactured solely for water heating.
7. Monitor the Water Quality
Hard water can form a layer of scale over the heating elements because of its temperatures, hardening the removal process of temperatures. A water softener will be a great investment here and ensure that the lifespan of the system increases.
8. Schedule Professional Inspections
Even with the best care taken by a homeowner, there are certain problems that can only be solved by a professional. You can schedule an inspection with a certified plumber once a year to check that everything is all right.
With these tips, you’ll have plenty of hot water on demand for a long time while optimizing performance and longevity. It saves money from repairs, but more importantly, allows you to enjoy some peace of mind that your investment is well protected.
In case you are looking for water heater installation in De Leon, TX, we at Iron Horse Mechanical and Plumbing Services, INC, are here to help.